How To Insert A Tape Into A Cash Register

Table of contents:

How To Insert A Tape Into A Cash Register
How To Insert A Tape Into A Cash Register

Video: How To Insert A Tape Into A Cash Register

Video: ER-285 Cash Register Setup 2022, December
Anonim

The cash register helps to keep track of all the income of the store. For the whole day, punching checks, you can forget or miss the amount of goods sold. However, when the cash desk is closed daily, the total amount of income becomes visible on the final receipt. The use of the device every day leads to the fact that sooner or later the check tape runs out and must be replaced. It is quite easy to insert the tape into the cash register.

How to insert a tape into a cash register
How to insert a tape into a cash register

It is necessary

  • - receipt tape;
  • - cash machine.

Instructions

Step 1

Open the cover of the machine. Prepare the tape to be inserted. Remove the plastic rod from the holes in the brackets, which will hold the roll of receipt paper.

Step 2

With a gentle movement of your hand, remove the plastic cover from the device. Take the end of the check tape in your hand and, slowly, slip it under the shaft.

Step 3

Start the checkout machine. Press the key with the arrow pointing up. After that, if you did everything correctly, the rubber shaft will start rotating, thereby tightening the end of the tape, and the cash register will give you a blank receipt.

Step 4

Using a tear-off comb, tear off a clean receipt and close the lid of the device.

Step 5

You can also insert the tape into the device in another way, in which you do not need to remove the cover.

Step 6

To do this, push the end of the tape into the slot of the casing, turn on the device, and press the button with the vertical arrow shown several times.

Step 7

Place the roll so that it is opposite the holes in the installed brackets. And attach it with a plastic rod. Then close the lid and the cash register can be used again.

Popular by topic