Mobile operator Activ allows its subscribers to send or donate units to friends and acquaintances without waiting for their request. To do this, just use a special command in USSD or go to the Infopark menu. At the same time, there is a limitation not only on the number of transferred units, but also on the number of operations performed.
Instructions
Step 1
Remember that the "Active Assistance" service, which allows you to transfer units to the number of another Activ subscriber, is active by default. However, if you have disabled this service on your phone, then in order to enable it again, you need to dial the combination * 123 * 3 * 5 * 4 # on your phone. After that, it is necessary to confirm the activation of "Active help" by pressing the corresponding button.
Step 2
Transfer units from asset to asset using the Infopark menu. To do this, dial * 123 * 3 * 5 * 3 #. After that, indicate the number of the subscriber to whom you want to donate units, and enter their number. Wait for a reply SMS message with a confirmation code. Send it to the required number. In a few seconds, the units will arrive at the addressee.
Step 3
Use the USSD menu to convert units. Dial * 141 #, enter the subscriber's number and the number of units to be redeemed. Confirm the operation and receive a reply SMS message, which will indicate the transfer amount and the balance on your balance.
Step 4
Translate units with one command line. To do this, enter the following combination: * 143 * 1 * 770-recipient's number * number of units # and press the call button.
Step 5
Review the set of conditions for transferring units from asset to asset. The operation can be performed no more than 10 times a day for amounts from 50 to 2000 units, while up to 5000 units can be donated within a month. To send this gift, the sender must have at least 50 units on his balance sheet. One transfer costs 7, 07 units, which are automatically removed from the received transfer. The service is available in roaming.
Step 6
Request units. To do this, in the Infopark enter the combination * 123 * 3 * 5 * 2 # or in USSD - * 141 #, then enter the subscriber's number and the amount of units. This service is available even with a zero balance, and the request is valid within 24 hours from the moment of sending.
